Friday, September 12th 2025, 1:29am UTC+2

Giriş yapmadınız.

  • Giriş
  • Kayıt

Tinky ported to VERBATIM/SMARTDISK SOHO NAS

Sayın ziyaretçi, NAS Forum sitesine hoş geldiniz. Eğer buraya ilk ziyaretiniz ise lütfen Yardım bölümünü okuyunuz. Yardım bölümü bu sitenin nasıl çalıştığını açıklamaktadır. Site özelliklerinin tümünü kullanabilmeniz için öncelikle kayıt yaptırmanız gerekmektedir. Kayıt yaptırmak için kayıt formunu okuyabilir ya da kayıt işlemi hakkında daha fazla bilgi edinebilirsiniz. Eğer önceden kayıt yaptırdıysanız, buraya tıklayarak giriş yapabilirsiniz.

treepleks

Acemi

Mesajlar: 1

1

Sunday, June 15th 2008, 4:58pm

Tinky ported to VERBATIM/SMARTDISK SOHO NAS

Just a word to inform the author(s) of tinky that I have "ported" tinky to another Centroid based NAS produced by SMARTDISK (now owned by Verbatim).

The firmware is based on the current release of tinky, has its own kernel, uses a recent busybox, with more applets in and dropbear 0.51 with tunnelling and still allows printing (lpd/lpr). These upgrades could be easily extracted from the firmware available here:

http://thomas.schiex.free.fr/Sohonas/SohonasTinky-130608/

to inject them in the NAS2000 firmware if needed.

I also needed FLAC support on mt-daapd. So I created new packages:

libflac8_1.2.1_armv4tl.ipk
libvorbis_0.3.2_armv4tl.ipk
libvorbisfile_3.2.0_armv4tl.ipk
mt-daapd_1696-svn_armv4tl.ipk

They will be soon available at

http://thomas.schiex.free.fr/Sohonas/SohonasTinky-130608/ipkg/

I would like to thank the NAS2000 community for this excellent work and all the information on the wiki.

Viele danken
Thomas

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

2

Sunday, June 15th 2008, 8:06pm

Hello Thomas!
First I would like to welcome you here at our forum!
Thank you very much for your post. If you like you could also put that information into the wiki. It is free for everybody.
I hope some of our members will profit from your very interesting development.

Thank you again,
HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

3

Saturday, December 27th 2008, 12:54pm

How do I ??

Hi,

i have a verbatim/SmartDisk SOHO NAS at version 2.3.2.03b

I want to install your firmware ... can you point me to good direction (I don't understand german)

kind regards,
Zydoon..
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

4

Sunday, December 28th 2008, 10:14am

Welcome zydoon,
but this article and the NAS2000 Wiki is written in English :think:

For more information about Tinky there is a mailing list and Flipstar's FAQ page.

Regards, HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

5

Tuesday, December 30th 2008, 3:27pm

thank you for your reply,

I tried what's mentioned in the wiki, but withtout success.

I cannot catch the bootloader at 192.168.2.71 and not even at 192.168.0.1 (as mentioned here: http://www.nslu2-linux.org/wiki/HowTo/TelnetIntoRedBoot)

??? :whistling:
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

6

Tuesday, December 30th 2008, 4:41pm

Have you also tried the IcyBox FlashStart tool?
Can be found here at download/tools

The IP of the bootloader should be 192.168.2.71 as mentioned at ThomasSchiex's Soho NAS Smartdisk Wiki

Regards, HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

7

Wednesday, December 31st 2008, 9:40am

getting better

Hi again,

I was able to catch the bootloader ... (I didn't before because there was 3 switches between my PC and the NAS)

now I have the SohonasTinky-130608.tar.gz firmware
containing:

Kaynak kod

 
1
2
3
4
5
6

[fzied@mishket sohonas]$ tar tzf SohonasTinky-130608.tar.gz
ImageInfo
zImage
rd.gz
hddapp.tgz
curconf.tgz


isn't safe to upload it via the web interface ?

it is said that's it's based on tinky, and my nas is still on the original firmware
:think: ?(

Kind regards,
Zydoon.
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

8

Wednesday, December 31st 2008, 10:36am

Made it

Hi again,

I gothered all my courage in two hands and made it through the web interface.

am happy :)

but ... cannot connect wia SSH:

Kaynak kod

 
1
2
3
4

[root@mishket ~]# ssh root@sohonas
root@sohonas's password: 
Disconnecting: Bad packet length 2115447630.
[root@mishket ~]#


can someone help please ?
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

9

Saturday, June 13th 2009, 6:55pm

activate telnet

Hi,

It's been a long time.

how can I activate telnet in ThomsShiex's tinky image ? ?(
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

10

Saturday, June 13th 2009, 6:58pm

SSH Access

As I cannot access via SSH (Windows/Linux)

I'm suspecting the key generation, do you know where can I find'em ?

I'll connect my disk via USB and will try to remove'em, reboot and see


bye
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

11

Sunday, June 14th 2009, 9:48am

Hello zydoon,
you could try to activate telnet.

Tinky has a feature "tinky_hook" which allows scripts being executed at boot. This is described in filp's README.
You have to create a script tinky_hook here /mnt/IDE1/public/tinky

There is a German post how to activate telnet on the Raidsonic NASs.
Normally telnet is activated using inetd. It must be configured to do so (/etc/inetd.conf) and the telnetd binary must be on the box or included in the busybox.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

12

Sunday, June 14th 2009, 1:18pm

Alıntı sahibi "HWguru"

There is a German post how to activate telnet on the Raidsonic NASs.
Normally telnet is activated using inetd. It must be configured to do so (/etc/inetd.conf) and the telnetd binary must be on the box.

HWguru
Hello HWGuru, always helpful as you are :)

the link mentioned above is not pointing the article you meant, would gimme the right one ?

thank you,
Zydoon.
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

13

Sunday, June 14th 2009, 3:26pm

sorry, was late yesterday evening ;) - corrected
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

RoadRanger

Acemi

Mesajlar: 2

14

Monday, December 20th 2010, 12:49am

Just thought I'd add my report:

I was able to "upgrade" my SohoNAS to the Tinky version in this thread but as everyone else I was not able to find an SSH client for windows that will talk to it. I then decided to go back to the stock firmware that at least supports Telnet but now it doesn't boot. I tried using redboot to reflash the "firmware.save" file available on the same website as the special Tinky version but no joy :( . I can get it to download it from my TFTP server but it doesn't seem to want to flash it or something? I type in "Y" when asked if I want to flash but never hear anything else back after that?

Benzer konular