Wednesday, October 29th 2025, 12:47pm UTC+1

Giriş yapmadınız.

  • Giriş
  • Kayıt

BIG PROBLEM unbricking 35HD-dual-nas-e wih FTDI USB a UART TTL

Sayın ziyaretçi, NAS Forum sitesine hoş geldiniz. Eğer buraya ilk ziyaretiniz ise lütfen Yardım bölümünü okuyunuz. Yardım bölümü bu sitenin nasıl çalıştığını açıklamaktadır. Site özelliklerinin tümünü kullanabilmeniz için öncelikle kayıt yaptırmanız gerekmektedir. Kayıt yaptırmak için kayıt formunu okuyabilir ya da kayıt işlemi hakkında daha fazla bilgi edinebilirsiniz. Eğer önceden kayıt yaptırdıysanız, buraya tıklayarak giriş yapabilirsiniz.

  • 1
  • 2

TENERIFEZ

Acemi

Mesajlar: 24

21

Tuesday, June 16th 2009, 10:22pm

hi,

exist any redboot.bin (for giganas) to enable the conetion telnet over ethernet?

Can i flash the redboot of dualnas for access form ethernet at 192.168.2.71 : 9000 ip?

thans

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

22

Tuesday, June 16th 2009, 10:39pm

No, sorry :(

This does not work for the Giganas and NAS4220.
It would only be possible if someone compiles a new bootloader.

There was one guy who did soemthing like this, but I cannot remember at the moment.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

23

Wednesday, June 17th 2009, 10:35am

Hi, I'm quite rockcod ;)

I think that to flash one redboot (from another device of this: http://mrt.nas-central.org/wiki/StorLink_based_products ) to enable the telnet access from ethernet. Yesterday i probe a redboot of dualnas (mi device is giganas) and boot cerrectly, but this redboot not enable the telnet access to 192.168.2.71 ip.

What do you think? It is possible? I am crazy?

Do you know one device redboot with telnet access (by ethernet) enabled?

Thanks friend :worthy:

PD.: Another crazy idea, can i flash the bootloader from another GIGANAS from other user who previosly enable the telnet access of their nas form ethernet?

Bu mesaj 1 defa düzenlendi; son düzenleyen "TENERIFEZ" (Jun 17th 2009, 11:06am)

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

24

Wednesday, June 17th 2009, 11:06am

Hey man!

If you ask 10 times if there is a way someone would have to anwser 10 times NO. Please stop that X( .

With flashing bootloader of different hardware platforms you risk to destroy you hardware completely.
Even if the redboot of DUAL-NAS boots the flashes on the boards are of different size and organization.

Would you try to flash a mainboard bios for a different board?

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

25

Wednesday, June 17th 2009, 11:22am

Sorry Master :P

The bootloader or redboot are the same leght 128kb, for MRT devices.

I try to enable the telnet access (from ehternet) to redboot to flash the device, do you undertand me?

I am looking for a redboot with ethernet tlenet enabled to access this.

Thanks

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

26

Wednesday, June 17th 2009, 11:43am

Alıntı sahibi "TENERIFEZ"

I try to enable the telnet access (from ehternet) to redboot to flash the device, do you undertand me?
Yes, I know, I understand.

Believe me, it does not work.

Note: length is not everything :D
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

27

Thursday, June 18th 2009, 9:57am

Hi,
today morning I was in contact with the guy who modified the bootloader.
This version boots the kernel an ramdisk from harddisk. Then it should be possible to flash the firmware from the web if.

He must check for the latest version. If I have it in my hands I will post it.

Hope to have a workaround soon 8)

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

28

Thursday, June 18th 2009, 11:28pm

I LOVE YOU!!! :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy: :worthy:

Can you send me this redboot to flash and probe?

i probe a lot of redboots but with poor resaults (not telnet access).

A friend give me a nokia CA-42. I cut it, and look 5 wires. I probe with this and dont respond JP1. I think that the fucker JP1 is destroyed because dont respond with 2 diferents adapter.

Thanks from spain :D

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

29

Monday, June 29th 2009, 8:54am

Hi,
I have got a modified bootloader.
This version tries to boot the kernel and ramdisk from disk. You have to put zImage and rd.gz to the first partition on disk. Normally this is the system partition if the disk has been formatted by the nas before.
If not, you have to format with ext2 or ext3.
The system should boot and then you can perform a standard firmware upgrade throughout the web if. Then you can write the original bootloader with JTAG again.

Hope this works,
HWguru
HWguru belirtilen dosyaları ekledi:
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

30

Monday, June 29th 2009, 1:00pm

Great job MASTER, i probe this solution today and post resaults.



Thanks :worthy: :worthy: :worthy:

TENERIFEZ

Acemi

Mesajlar: 24

31

Monday, June 29th 2009, 9:33pm

Hi, i flash the new boot, but, i can access to nas by ethernet :(

the device have the default ip 192.168.0.200

I format a ide 200gb HD with ubuntu in ext3 format, copy the rd.gz and the zImage to the HD.

I dont know, god hates me

TENERIFEZ

Acemi

Mesajlar: 24

32

Friday, July 3rd 2009, 5:19pm

Hi master.

Can i flash the nas (firmware, no redboot) with the JTAG?

thanks

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

33

Friday, July 3rd 2009, 5:26pm

No, is not supported by the tool.

I am going to prepare a snapshot of a fresh system these days. Although it is from a NAS4220 it should boot on the MRT. I have been very busy these days.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

34

Friday, July 3rd 2009, 5:39pm

Ok, dont worry, i have patience for waiting thanks master :worthy: :worthy:

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

35

Sunday, July 5th 2009, 1:09pm

Hi,
I made a snapshot of a NAS4220's fresh system partition. I already put a Giganas rd.gz and zImage to the root.
It can be downloaded here. I hope that it would boot on a MRT Giganas.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

36

Friday, July 17th 2009, 11:46am

Hi master, sorry for dont respond quickly, but I've been away on holidays ;)

I tried your last reply (with HD sata & ide), and dont work :(

The last solution is reflash the firm with JTAG, or another posibility (without serial port) :think:

Thanks master for all :worthy:

TENERIFEZ

Acemi

Mesajlar: 24

37

Thursday, March 11th 2010, 4:08pm

Hi master, i try to revive teh device....

I can write the default redboot on the device. When the device starts, can i ping it to the ip 192.168.0.200 correctly...

The system aparently work, but the hd is empty. I try with a Ide disk 200gb.

What partition table can i do in the HD? In what partitions copy that archives?

Thanks for all...

PD.: I returned to try to rescue the device...

EDIT: sorry i remember the problem, can i access to the redboot with the serial ttl (it is the problem of the device)...

Do you know a redboot for this device with redboot with access enabled for ethernet to try this? for example redboot of another device type LA FONERA (have a redboot with ethernet access)...

Thanks for all

Bu mesaj 2 defa düzenlendi; son düzenleyen "TENERIFEZ" (Mar 11th 2010, 4:32pm)

HWguru

NAS2000-Team

Mesajlar: 1,039

Konum: Wien

38

Sunday, March 14th 2010, 4:38pm

Hi,
some times ago I took an old disk (800MB) and set up a new system.
On a Raidsonic NAS2000 the disk looks like this:

Kaynak kod

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

icybox> mount
usbfs on /proc/bus/usb type usbfs (rw)
/dev/hda1 on /system type ext2 (rw)
/dev/hda2 on /mnt/IDE1 type ext2 (usrquota,grpquota)
icybox> df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/hda1                99549     12040     82369  13% /system
/dev/hda2               172771     17163    146688  10% /mnt/IDE1
icybox> cat /proc/partitions
major minor  #blocks  name

   3     0     793914 hda
   3     1     102815 hda1
   3     2     178416 hda2
   3     3     512568 hda3
icybox> cat /proc/swaps
Filename                                Type            Size    Used    Priority
/dev/hda3                               partition       512560  0       -1

How it would look on a MRT NAS - I don't know because I do not own such a nas.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

TENERIFEZ

Acemi

Mesajlar: 24

39

Monday, March 15th 2010, 10:33am

Thanks master ;)

TENERIFEZ

Acemi

Mesajlar: 24

40

Thursday, April 8th 2010, 10:29am

Hi master, please, check your email, i have great news:

The beta version of your soft NasFlashTool works 100% perfect. Can i fix my nas and flash it all the flash in the JP2 with the usb/ttl (over 19 hours and DONE).

Thanks master, GREAT JOB.

Thanks from spain ;)
  • 1
  • 2

Benzer konular